The bottom line is that it should work with the FTP helpers on. I have invested damn near 80 hours in making FTP work in every situation that I could. At this point I don't know what to do or say as it works in every single install that I have access to. Really sorry that I dont' have more information.
Scott On 6/5/06, Robert Goley <[EMAIL PROTECTED]> wrote:
I have a similar situation and have not been able to make this work. I have a dual wan policy based setup. Wan interface is DHCP cable modem. OPT1 is DSL with static IPs. I have tried setting up a port forward for ftp from OPT1->LAN. This have failed several ways. What are the official steps for setting this up. I know Scott mentioned enabling ftpx for passive connections. Others have said to open other port ranges but not much details as to which ones. I am using wu-ftpd for the ftp server. Currently, turning pftpx seems to break things more than not having it. Without it some clients can connect and others such as wget can not. With it on, nothing can connect. Even "telnet IP_ADDRESS 21" fails. It starts to connect to the port and then is immediately dropped. Any help or hints would be greatly appreciated. Robert On Thursday 01 June 2006 11:32, Scott Ullrich wrote: > Enable the FTP helper on Interfaces -> WAN. Reboot. > > On 6/1/06, Bernhard Ledermann <[EMAIL PROTECTED]> wrote: > > I am using an ftp-server behind pfsense (beta4) with NAT. I have problems > > with ftp-clients in passive mode witch are also behind a firewall with > > NAT to browse the ftp-directory. > > > > I know there were few discussions about this, but is there a solution or > > workaround to get it working? > > > > > > > > Regards > > > > Bernie > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
--------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
