Dual WAN and ftp is a different story: http://faq.pfsense.com/index.php?action=artikel&cat=1&id=142&artlang=en&highlight=userland
Holger > -----Original Message----- > From: Robert Goley [mailto:[EMAIL PROTECTED] > Sent: Monday, June 05, 2006 11:53 PM > To: [email protected] > Subject: Re: [pfSense Support] passive FTP > > > I have a similar situation and have not been able to make > this work. I have a > dual wan policy based setup. Wan interface is DHCP cable > modem. OPT1 is DSL > with static IPs. I have tried setting up a port forward for ftp from > OPT1->LAN. This have failed several ways. What are the > official steps for > setting this up. I know Scott mentioned enabling ftpx for passive > connections. Others have said to open other port ranges but > not much details > as to which ones. I am using wu-ftpd for the ftp server. > Currently, turning > pftpx seems to break things more than not having it. Without > it some clients > can connect and others such as wget can not. With it on, nothing can > connect. Even "telnet IP_ADDRESS 21" fails. It starts to > connect to the > port and then is immediately dropped. Any help or hints > would be greatly > appreciated. > > Robert > > On Thursday 01 June 2006 11:32, Scott Ullrich wrote: > > Enable the FTP helper on Interfaces -> WAN. Reboot. > > > > On 6/1/06, Bernhard Ledermann > <[EMAIL PROTECTED]> wrote: > > > I am using an ftp-server behind pfsense (beta4) with NAT. > I have problems > > > with ftp-clients in passive mode witch are also behind a > firewall with > > > NAT to browse the ftp-directory. > > > > > > I know there were few discussions about this, but is > there a solution or > > > workaround to get it working? > > > > > > > > > > > > Regards > > > > > > Bernie > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > ____________ Virus checked by G DATA AntiVirusKit --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
