Well your 100% right, if the IP is set to PARP it will not work, I do have two instances of pftpx though, one with just the private IP, and then one with private and public, and all works well now, did have to reboot after setting the VIP's to CARP and re-adding the firewall rule, but all works perfect now.
Thanks again for all the help! Brad On Monday 05 June 2006 22:00, Scott Ullrich wrote: > On 6/6/06, Brad Bendy <[EMAIL PROTECTED]> wrote: > > Ive removed and re-added the FTP NAT entry. It did say it added a entry > > for FTP helper, but all I see is a firewall rule that adds all port 21 > > for LAN and WAN, and I dont see any deny's in the firewall log. Any > > reason I cant run this command manually that you would be aware of? > > > > Thanks again for all the help. > > It also adds a NAT rule for this in port forward. With the frewall > rule it should launch a pftpx process for this public ip. You can > simply do a ps awux | grep pftpx | grep $publicip > > Replace $pulbicip with your WAN address. > > Scott > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
