Re: [pfSense Support] ADD more routes to IPsec Tunnel

[Alvaro Pietrobono]

Yes, with OPENVPN you can route everything because it create a point-to-point tunnel interface(tunX) within you can incapsulate all desidered traffic....but unfortunately it is incompatible with Cisco devices.... I resolved the problem with one tunnel on cisco router and 3 identicals tunnel that differ only for remote lan: 1 for 192.168.0.0/16 1 for 10.0.0.0/8 1 for 172.16.0.0/16 This configuration cover all private adresses and it's good for almost all the cases.   ~Alvaro       ----- Original Message ----- From: Tunge2 To: support@pfsense.com Sent: Tuesday, June 20, 2006 5:56 PM Subject: Re: [pfSense Support] ADD more routes to IPsec Tunnel and what about openvpn? is it possible to route without having to add separate tunnels for every different subnet? 2006/6/20, Eric Masson <[EMAIL PROTECTED]>: "Scott Ullrich" <[EMAIL PROTECTED]> writes: Hi Scott, > You need to bind up tunnels for each subnet that you want to use.  No > real easy way to add routes through the tunnels. Another way could be to use IIPtran from rfc3884 : http://rfc.net/rfc3884.html Regards Éric Masson -- supprimer ce groupe serait complètement stupide et par ailleurs le pur produit d'un dino ayant ses règles -+- J in Guide du Neuneu Usenet : Ovide pare et Mamie ferre. -+- --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]