Hi Scott, Holger
> On 6/9/06, Rory Campbell-Lange <[EMAIL PROTECTED]> wrote:
> >We edited the page as directed, but the problem (no wpa authentication
> >required) still persists.
>
> I just went to tripple check this and noticed it was broken and
> started to freak out big time but then I noticed that "Enable WPA" was
> not checked. Please double check this setting. We wpent about 8
> hours on this feature the last week.
We reset the page as directed and checked that "Enable WPA" was
selected. No joy.
We have flashed again with the latest pfSense download image today and
the problem still persists. Relevant bits of the config are shown below.
Regards,
Rory
<?xml version="1.0"?>
<pfsense>
<version>2.3</version>
<lastchange/>
<theme>metallic</theme>
<system>
...
</system>
<interfaces>
<lan>
<if>sis0</if>
<ipaddr>192.168.1.1</ipaddr>
<subnet>24</subnet>
<media/>
<mediaopt/>
<bandwidth>100</bandwidth>
<bandwidthtype>Mb</bandwidthtype>
</lan>
<wan>
<if>sis1</if>
<mtu/>
<ipaddr>dhcp</ipaddr>
<subnet/>
<gateway/>
<blockpriv/>
<disableftpproxy/>
<dhcphostname/>
<media/>
<mediaopt/>
<bandwidth>100</bandwidth>
<bandwidthtype>Mb</bandwidthtype>
</wan>
<opt1>
<descr>OPT1</descr>
<if>ath0</if>
<wireless>
<standard>11b</standard>
<mode>hostap</mode>
<protmode>off</protmode>
<ssid>testwlan</ssid>
<channel>0</channel>
<authmode/>
<txpower>99</txpower>
<distance/>
<wpa>
<macaddr_acl/>
<auth_algs>1</auth_algs>
<wpa_mode>1</wpa_mode>
<wpa_key_mgmt>WPA-PSK</wpa_key_mgmt>
<wpa_pairwise>TKIP</wpa_pairwise>
<wpa_group_rekey>60</wpa_group_rekey>
<wpa_gmk_rekey>3600</wpa_gmk_rekey>
<passphrase>jaMb0n</passphrase>
<ext_wpa_sw/>
<wpa_strict_rekey/>
<enable/>
</wpa>
<wep/>
</wireless>
<bridge>lan</bridge>
<enable/>
<ipaddr/>
<subnet>32</subnet>
<gateway/>
<spoofmac/>
<mtu/>
</opt1>
<opt2>
...
</opt2>
</interfaces>
<installedpackages/>
<revision>
...
</revision>
</pfsense>
--
Rory Campbell-Lange
<[EMAIL PROTECTED]>
<www.campbell-lange.net>
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
