With patching I meant cable patching, rewireing, no software modifications ;-)
> -----Original Message----- > From: Holger Bauer > Sent: Tuesday, June 27, 2006 4:48 PM > To: [email protected] > Subject: RE: [pfSense Support] Use pfSense with exisiting HW users > > > You have to do some reconfiguration of the routers and some > patching but it works if setup like this: > > DSL1 DSL2 DSL3 > 172.16.0.1 172.16.1.1 172.16.2.1 > | | | > | | | > WAN OPT1 OPT2 > 172.16.0.2 172.16.2.1 172.16.2.2 > [ pfSense ] > 192.168.1.1 > LAN > | > | > LAN Network > > Set up all WAN interfaces static with gateway connected > DSL-Modem-Router. > At your DSL Modem-Routers set the pfSense WAN, OPT1, OPT2 IP > as DMZ host. > Set up a lodablancing pool using all 3 DSL-Modem-Routers. > Set up firewallrules to use the pool and/or a special WAN for > special traffic. > > IPSEC might be a bit tricky in this configuration but > everything else should work. > > There is no limitation how many WANs a pool can have, your > Hardware is your limit. > > Holger > > > > > -----Original Message----- > > From: Thomas Riedrich [mailto:[EMAIL PROTECTED] > > Sent: Tuesday, June 27, 2006 4:35 PM > > To: [email protected] > > Subject: [pfSense Support] Use pfSense with exisiting HW users > > > > > > Currently our company has three DSL connections. Each DSL > > connection is > > managed by a Netgear DSL Router with the IPs 172.16.0.1, .2 > and .3. I > > want to setup a computer with pfSense for load balancing/fail > > over. The > > problem is, it seems pfSense only works when I have the DSL modems > > connected to the pfSense computer itself, or can pfSense be > configured > > to use the exisiting three routers somehow? The DSL > > connections/existing > > users are spread all over the company building, so I can't put the > > pfSense computer somewhere and connect all the DSL modems > to it. Does > > pfSense support three WANconnections anyway? > > > > Thanks for your help, > > Tom > > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > ____________ > Virus checked by G DATA AntiVirusKit > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > ____________ Virus checked by G DATA AntiVirusKit --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
