You have to exclude the traffic from the dmz to the lan and from lan to dmz from loadbalancing (btw, same applies to IPSEC subnets). Create a firewallrule at the top of your list that is passing traffic between the locally attached subnets via the default gateway and not the gateway pool. If you have a balance all rule at the interfaces it will forward the connections roundrobin to the gateways of the pool and not route between the local interfaces.
Holger -----Original Message----- From: Rob Terhaar [mailto:[EMAIL PROTECTED] Sent: Thursday, July 06, 2006 6:05 AM To: [email protected] Subject: [pfSense Support] Default Gateway Firewall Rule (dual wan) So i'm setting up my first pfsense dual wan box. I've followed the fairly short+simple pdf file under the tutorial section on the website. Once i get past the last step where you change the default gateway on the firewall rules, i can no longer pass any t raffic out from my lan. no lan->DMZ, nothing. I can still connect to my lan from my dmz, but not vise-versa. I've been banging on this for a couple of hours now, and i'm sure someone out there has a bit of advice for this seemingly simple configuration. ____________ Virus checked by G DATA AntiVirusKit --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
