I have a few Gb I pulled out of a Dell Quad P3 somewhere in work, I'll have a look for it on Monday. If it's the right stuff I'll post it to you.
> -----Original Message----- > From: Chris Buechler [mailto:[EMAIL PROTECTED] > Sent: 08 July 2006 02:41 > To: [email protected] > Subject: Re: [pfSense Support] Second Annual pfSense > Hackathon - Call for Donations > > Scott Ullrich wrote: > > We have a proliant 8500R. > > which is currently a quad PIII Xeon 550, 2 MB L2. > > It uses PC100 registered ECC SDRAM, and has 16 slots, 8 of which are > empty I believe. > > The other server is a dual PIII 1 GHz, it uses PC133 registered ECC > SDRAM. It has 4 slots, all of which are full (4x256), so we need at > least 512 MB chips for it. > > > > We are needing ram for this machine big > > time. > > and for the other even worse, though that'll be a bit > alleviated after > we upgrade the disks. right now the box with 1 GB RAM hosts > more than > the box with 2 GB RAM because it has 4* the drive space. > > > > We can also use additional processors, as we have 4 open slots. > > though that might be quite difficult, unless somebody has a bunch of > procs and we can just replace them all. I'm not sure how picky these > old Xeons are about steppings matching. > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
