On Thu, 3 Aug 2006, Jonathan Wanak wrote:
I see the pfSense boot-up and shut-down messages in HyperTerminal. However, once I get to the line "Bootup complete" I can't seem to do anything. I was expecting to see the main console screen at this point, but nothing further appears. When I reboot via the web configurator, I see the shutdown messages in HyperTerminal.
It sounds like the console is being set to the serial port (look in /boot.config), but that no getty is being spawned on the console. To make it "just work" for now, manually edit /etc/ttys and stick something like this on the proper serial line:
ttyd0 "/usr/libexec/getty std.9600" vt102 on secure Then "kill -HUP 1" to have the file re-read. Charles
Thanks, Jon --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
--------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
