I read thru your forum post and i'm not sure what i can do to fix my situation.
in the latest pfsense revisions, the acks are already set up to 25% bandwidth- and really what's troubling is that i've had the same configuration running perfectly for 3+ months. Just recently, these problems came up. But rebooting always makes the traffic shaper come back to life! Perhaps i'll try to do a reinstall, i've been doing upgrades to the system for a while, and there might be some cruft... On 9/14/06, Scott Ullrich <[EMAIL PROTECTED]> wrote:
On 9/14/06, Rob Terhaar <[EMAIL PROTECTED]> wrote: > So the reason why i started to dig into the status screen is because we've > started to have issues with the traffic shaper- > > After about a day, it seems like the traffic shaper falls asleep, which > manifests it's self in drop outs on our VOIP phones. A reboot fixes the > problem. > > Here's some more information about my setup. (i apologize in advance if this > is too much information :) ) > > We have two physical offices, and a 10baseT link between them. the main > office is LAN on the pfsense, the 2nd office is opt1. I also have voip > phones running on the LAN vlan4 (which is connected opt2), and vlan4 at the > 2nd office (which is connected to opt3). Opt2 and opt3 are bridged so that > the phones in the 2nd office on vlan4 can be routed to the phones on vlan4 > on the LAN in the main office. > > __________ __________ > .1.0/24 .2.0/24 > main office <routed> 2nd office > __________ __________ > vlan4 <bridged vlan 4 > .4.0/24 [.4.0/24] > > The pfsense machine has 3 physical interfaces, WAN, LAN, OPT1. OPT2/3 are > vlan interfaces that belong to LAN and OPT1, respectively. > > I'm using the pfsense traffic shaper on the bridged vlan connection. I set > it up using the wizard, and only setup the provision for asterisk/voip. Visit the tips and tricks forum thread which discusses some issues to look for. Last I heard the shaper does not work with bridged interfaces. Scott --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
--------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
