On 9/16/06, BW <[EMAIL PROTECTED]> wrote:
Hi all, I have a WRAP 2C with 1 ethernet port and 1 wireless card. I have it set with WAN on ethernet port and LAN on wireless and configured it with transparent firewall. I have one computer connected to the WAN port then wireless serial servers connected to the LAN. Now i can ping from the PFSENSE box to all clients on both WAN and LAN and can ping from all client to the PF box but i can not get any client to ping through to the WAN port from LAN and vice versa. I have rules on both WAN and LAN to pass from any to any. But as soon as i disable the firewall everything works. Can some one please help me set these rules properly? I and running RC2a.
Do you have Filtering Bridge checked in System->Advanced? Also, if you are just bridging, I think (not positive, my machine is still running B4 and there were known bugs with this in it) you have to turn off NAT in Firewall->NAT->Outbound NAT. Enable advanced nat, click save, delete the rule that gets auto created, save again and apply. --Bill --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
