just a note, the 2nd office that i support only has the 1.0-SNAPSHOT-09-06-06 installed currently- but it's been stable!
On 9/22/06, Rob Terhaar <[EMAIL PROTECTED]> wrote:
At my office I have two users who connect from windows machines to our main office. They are connected 9-5 and use the vpn only for Exchange. We're running the 09-14-06 snapshot. One problem that i noticed recently is that after a recent reboot, i had to add a rule and delete it before traffic would be allowed thru the firewall. I figured it was a fluke. I've done a fresh reinstall since then and have had no notable issues. Another company that i do work for uses the openvpn connection for 10 windows users across the country. They use the vpn to provide SSH access to a large bank of old unix machines on tuns of different subnets. This setup is a bit crazy because the pfsense machine has 15 different vlan interfaces, all connected to a managed switch that acts like a channel bank. each interface is then connected to a larger nokia router, which then routes out to tuns of differnt internal routes. (i think they have over 40 subnets total, across 6 nokia/cisco routers) My openvpn push statement pushes out 10 different routes to the clients, and the static routing table in the pfsense is spaghetti. so yes, openvpn has been working pretty well for me! :) On 9/22/06, Scott Ullrich <[EMAIL PROTECTED]> wrote: > Who out there actually uses OpenVPN and it works for them? > > Please either respond here and describe your setup or reply privately to me. > > We have a influx of OpenVPN problem reports and I am starting to > wonder if it works correctly at all. > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > >
--------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
