You might try changing the ip range at one of the sites to another subnet, perhaps a 10.x.x.x subnet on one end, and the 192.x.x.x on the other. Sometimes having the same subnet on both ends causes problems.
On 9/26/06, Jonathan Horne <[EMAIL PROTECTED]> wrote:
i know there has been a million threads about openvpn lately, so its time to throw mine into the mix too. i have 2 sites, with an ipsec tunnel between them. site 1 is 192.168.125.0/26 and site 2 is 192.168.125.64/26. both sites are just a simple single pfsense box (no carp or redundants or anything fancy. the ipsec vpn works great, and any host at any site can connect to any other host. site 2 has the openvpn on it, and i can connect in fine with windows xp from the internet. once connected, i can connect to any host at site2 with no problems. my issue, is that i cannot traverse the ipsec vpn to hosts at site1. anyone have any ideas where i can begin to troubleshoot this issue? cheers, jonathan --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
-- ------------------------------- A morning without coffee is like something without something else. --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
