We have some reports that msntp is randomly not working reliably at some systems. We are testing a replacement for it right now. If everything works well we'll roll out an update that will use another daemon to update the time soon.
Holger > -----Original Message----- > From: Alvaro Pietrobono [mailto:[EMAIL PROTECTED] > Sent: Tuesday, October 03, 2006 9:42 AM > To: [email protected] > Subject: Re: [pfSense Support] msntp > > > Same installation of 1.0-RC3 (on WRAP) but msntp > works fine... > > Oct 3 09:08:31 msntp[8889]: msntp: 2006 Oct 03 > 09:08:31.947 + -0.000 ± > 0.028 secs > Oct 3 09:08:31 msntp[8889]: msntp: after 1.2 secs acc. > 1 rej. 0 flush 0 > max.off. 0.078 corr. 0.078 > Oct 3 09:08:31 msntp[8889]: msntp: using NTP server ntp.ien.it > (193.204.114.105) > Oct 3 09:08:31 msntp[8889]: msntp: different > parameters for restart > Oct 3 09:08:31 msntp[8889]: d=18000 c=5 x=18000 op=1 > l=/var/run/msntp.pid > f=/var/db/msntp.state 193.204.114.105 > Oct 3 09:08:30 msntp[8889]: msntp options: a=2 p=0 v=1 > e=0.100 E=5.000 > P=2147483647.000 > > ~A > > > > ----- Original Message ----- > From: "Scott Ullrich" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Monday, October 02, 2006 9:12 PM > Subject: Re: [pfSense Support] msntp > > > > On 10/2/06, Roberto Greiner <[EMAIL PROTECTED]> wrote: > >> hi, > >> > >> I've just installed rc3, and got a problem with ntp. > >> > >> I've tried adding the ntp server both as a name and as an > IP address, > >> but in the logs I keep getting the following message: > >> > >> Oct 2 15:33:41 teste msntp[12662]: msntp options: a=2 p=0 > v=1 e=0.100 > >> E=5.000 P=2147483647.000 > >> Oct 2 15:33:41 teste msntp[12662]: d=18000 c=5 x=18000 op=1 > >> l=/var/run/msntp.pid f=/var/db/msntp.state A.B.C.D > >> Oct 2 15:33:41 teste msntp[12662]: msntp: bad daemon > restart information > >> Oct 2 15:33:41 teste msntp[12662]: msntp: unable to locate IP > >> address/number > >> Oct 2 15:33:41 teste msntp[12662]: msntp: Unknown error: 0 > >> > >> Putting a name gets the same message, just with the > machine name instead > >> of the A.B.C.D address. I'v also tried a rule in the > firewall opening > >> ntp udp port, using the ntp port both as source port and > destination > >> port, but it didn't work. Does anyone know what's > happening? The message > >> is beeing repeat every minute. > >> > > > > Thanks for the report. I'll look into it. At this point I am > > strongly leaning toward dumping MSNTP and replacing it with a sane > > program. > > > > Scott > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > --------((((((( Internet Email Confidentiality Footer )))))))-------- > > This e-mail, including any attachments, may contain > information that is > protected by law as privileged and confidential, and is > transmitted for > the sole use of the intended recipient. If you are not the intended > recipient, you are hereby notified that any use, > dissemination, copying > or retention of this e-mail or the information contained herein is > strictly prohibited. If you have received this e-mail in > error, please > notify immediately the sender by telephone or reply by e-mail, and > permanently delete this e-mail from your computer system. > The statements and opinions expressed in this e-mail message are > those of the author of the message and do not necessarily represent > those of List Group S.p.A. Besides, the contents of this message > shall be understood as neither given nor endorsed by List Group S.p.A. > List Group S.p.A. does not accept liability for corruption, > interception or > amendment, if any, or the consequences thereof. > > -------------------------------------------------------------- > --------- > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
