Roberto Greiner wrote: > Scott Ullrich wrote: > >> Please try and upload this fix: >> http://www.pfsense.com/~sullrich/pfSense-1.0-RC3d-Full-Embedded.tgz to >> System -> Firmware. >> > I installed the update, but now I'm getting the following error: > > Fatal error: Call to undefined function: bcmod() in > /usr/local/captiveportal/radius_accounting.inc on line 305 > > I'm getting it both at the Services/Captive Portal screen and when > trying to disconnect users at Status/Captive Portal > >> In terms of the reboot and halt issues, this is generally ACPI >> related, make sure your BIOS is up to date and check out >> http://wiki.pfsense.com/wikka.php?wakka=BootOptions and >> http://wiki.pfsense.com/wikka.php?wakka=BootTroubleShooting >> >> Scott >> >> > I will try it next. > I didn't make the update, but it won't work, because the only change in the latest bios for my board is an update for the LAN adapter. Anyway, I tried adding the line to disable ACPI, but it didn't help either.
Anyway, an interesting bit is that when trying to reboot from the console, I'm getting the same "undefined function: bcmod()" error message as I mentioned above. After that, the reboot (or halt, the result is the same) aborts and the console returns immediately to the normal menu. Roberto >> On 10/5/06, Roberto Greiner <[EMAIL PROTECTED]> wrote: >> >>> Hi, >>> >>> I'm getting a script error on the captive portal page. I'm making a test >>> run with 1.0rc3, and in my test I added a 10 minutes "idle timeout" >>> limit and a 30 minutes "Hard Timeout" (the small values are for the test >>> run only!). When I pressed the save button, I got a blank page with the >>> following line: >>> >>> Fatal error: Call to undefined function: getvolume() in >>> /usr/local/captiveportal/radius_accounting.inc on line 164 >>> >>> Captive portal has the following other settings: >>> * >>> *Enable logaout popup window is enabled >>> Radius Authentication (only primary server) >>> send Radius Accounting packets >>> Enable HTTPS login >>> HTTPS server name is filled, certificate and key windows have the proper >>> keys. >>> A portal page is set >>> >>> All the rest is empty or not set. >>> >>> The machine is a 2.4 Xeon, with a 74GB Sata disk e 1GB RAM. >>> >>> Also, the "Halt" and "Reboot" options in the Diagnostics menus don't >>> seem to be working. With the reboot command, I got the usual message >>> "The system is rebooting now. This may take a minute." But after 5 >>> minutes the system had not initiated the reboot and all the services >>> where still operating normally. No reboot was done. With the "Halt" >>> option, I got again the following message: >>> >>> Fatal error: Call to undefined function: getvolume() in >>> /usr/local/captiveportal/radius_accounting.inc on line 164 >>> >>> When I tried to reboot the machine with a "/sbin/reboot" from the >>> Diagnostics/Command screen, the webinterface and the server keyboard >>> ceased to answer. I tried the Power button, and to my surprise the >>> machine started a normal shutdown. So I couldn't verify if all functions >>> where still working properly. >>> >>> To be sure, I tried to reboot again 5 minutes later, and the same thing >>> happened. The halt command gave me the error message from above again. >>> This time I tried /sbin/halt instead of reboot, but the same thing >>> happened: The web interface stopped working, the machine keyboard too, >>> and pressing the power button made the machine start a shutdown. >>> >>> Besides that, another service that is giving me the same "Call to >>> undefined function" error message as above is trying to disconnect a >>> user through the Status/Captive Portal screen. I get the message and the >>> user is not disconnected. >>> >>> Roberto >>> > > > -- ------------------------------------------------------------------- | Marcos Roberto Greiner | | | | Os otimistas acham que estamos no melhor dos mundos | | Os pessimistas tem medo de que isto seja verdade | | Murphy | ------------------------------------------------------------------- | [EMAIL PROTECTED] | ------------------------------------------------------------------- --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
