As you seem to have a testsetup available please can you test reauthenticate user every minute and accounting too and report back?
Holger > -----Original Message----- > From: Roberto Greiner [mailto:[EMAIL PROTECTED] > Sent: Friday, October 06, 2006 5:25 PM > To: [email protected] > Subject: [pfSense Support] Radius Session-Timeout > > > I've made a test with the Radius Session-Timeout attributes, > but somehow > it didn't work. > > First I tried using the "Hard timeout" option from the Captive Portal > page, and after 45 minutes, as I had programmed, the client was > disconnected. After that, I left the Hard timeout field blank and > enabled the "Use RADIUS Session-Timeout attributes", but nothing > happened. The radius server is sending the attributes with a value of > 28800 (8 hours), but the user wasn't disconnected. > > I tried the same thing again again reducing the time to 1800 (30 > minutes), then to 900 (15 minutes), but again the client wasn't > disconnected. I've checked the reply packets from the radius server > (Freeradius 1.1.3), and the Session-Timeout attribute is being sent > properly. The Radius is sending the following attributes, > along with the > authorization: > > Framed-Compression=Van-Jacobsen-TCP-IP > Framed-Protocol=PPP > Service-Type=Framed-User > Framed-MTU=1500 > Session-Timeout=1800 > > In short, using the "Hard Timeout" options seems to be > working properly, > but "Use RADIUS Session-Timeout attributes" is not. > > Roberto > > -- > ------------------------------------------------------------------- > | Marcos Roberto Greiner | > | | > | Os otimistas acham que estamos no melhor dos mundos | > | Os pessimistas tem medo de que isto seja verdade | > | Murphy | > ------------------------------------------------------------------- > | [EMAIL PROTECTED] | > ------------------------------------------------------------------- > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
