When the IP cameras stop working, what's the state table size? It's displayed on the initial status screen when you login to pfSense. If it's closing on 10,000, you might want to raise the limit in System->Advanced.
--Bill On 11/27/06, Daniel Orcutt <[EMAIL PROTECTED]> wrote:
Hello, I currently have PFSense sitting between my private LAN and my DMZ My FTP Server is located in the DMZ and I have 6 IP Cameras on my private LAN that all record to the FTP Server. However, after a number of days of recording they are suddenly unable to connect to the FTP Server and the only resolution I have found is to reboot PFSense. My initial thoughts were that maybe it was too high of a load or possibly that resetting the states would help, but it didn't. The firewall handles a very large amount of traffic and connections as well as a large number of rules, routing and NATs, but this is the only issue I have seen so far. Any ideas? I am running the latest 1.01 version on decent hardware (decent for a firewall). Thanks a ton, -Daniel ________________________________ Get FREE company branded e-mail accounts and a Web site from Microsoft Office Live --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
--------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
