when you setup a port forward, the routing table on the pfsense should(?) be
smart enough to send the packets to the correct interface.
have you tried to setup a port forward to an IP on your dmz? did the packets
make it there? what did the firewall logs say?
On 1/1/07, Dane Reugger <[EMAIL PROTECTED]> wrote:
I would like to assign multiple IP addresses to the WAN port (rl0) then
forward ports based on IP to both LAN and DMZ computers. For example, I
have 2 IP's 129.129.129.1 and 129.129.129.2 - I would like to be able to
forward 129.129.129.1 port 443 to lan 192.168.0.1 and forward
129.129.129.2 port 443 to DMZ 10.0.0.1. Seems this should be simply
enough but the terms are swimming in my head and I have not found a
place to start. Any help is appreciated.
Thanks,
Dane
ip1 ip2
\ /
wan (rl0)
/ \
LAN(fxp0) DMZ (opt1?)
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
