On 1/18/07, Oliver Fette <[EMAIL PROTECTED]> wrote:
Hi ...
I'm running a WRAP system with Atheros Wifi card on a 2048/256 DSL
line. I use WPA2 encryption with DHCP on Opt1 Interface. The WRAP runs
over a couple of days without any problems but when there is a lot
traffic (near the maximum) over wireless (bittorrent, ftp download)
the WRAP system reboots. After the reboot it is impossible for the
Wifi client to connect to the WRAP - the client PC get always the same
IP (169.254.196.69) from DHCP but should get the IP from the DHCP
range - in this case - 192.168.3.15.
When I connect over the LAN to the WRAP I must switch the WPA password
(also at the client pc) to get a wireless connection to the WRAP ...
then all is working like before ... until the traffic is reached the
max ...
Anyone have the same problems?
Try upgrading to a recent snapshot from
http://snapshots.pfsense.com/FreeBSD6/RELENG_1/
Scott
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
