We are working with WRAP 2C boards with OLSR and we are having a lot of problems. We have checked through the forums all the conversations about this but we haven't found any solution. We are using them with a WIFI at 5 GHz in the olsr, one ethernet, and one WIFI at 2,4 Ghz in which we don't have olsr.
We are trying to fix problems on the code but we haven't found yet the solutions. We leave you here three problems we have found just in case you already have the solution, or if we could help in any way to fix them: 1.- We configure two equipments separately with olsr. Olsr don't create the routes if we don't reboot the equipment or restart olsr when the antennas are communicated. 2. - In a point to point link, with a correct route table. When there is no traffic during a while (30 minutes aprox.), in one of both equipment (pfsense that don't announce itself as gateway) the routes disappears. But, if the traffic is kept up (for example, with icmp traffic, doing pings constantly), the routes doesn't disappear. 3. - The HNA4 routes doesn't work. When we fill at the GUI the field "Announce Dynamic local route" we see that the olsrd.conf file appears well configured with the routes at HNA4. But instead of working these routes... all the routes crash! The olsrd process continue running, but as if it wasn't running. It seems that any olsr traffic doesn't pass, and there are no routes at all. --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
