In severall list-archives I have found out that OpenBSD's hostapd was ported to FreeBSD. So I don't know if hostapd will be included in future releases of pfsense?
2007/1/30, Kevin Bortis <[EMAIL PROTECTED]>:
Ok, in additional to connect them to my net :-) the should be able to deliver roaming for clients and if possible WPA. I guess that I should configure the AP's as repeaters so the authentication is made withe the firewall. Any comments? 2007/1/30, Espen Johansen <[EMAIL PROTECTED]>: > I don't see why it shouldn't work, but then again, you did not give > much info as to what you are trying to accomplish (like roaming etc.). > > -lsf > > On 1/30/07, kab <[EMAIL PROTECTED]> wrote: > > Hello, I run PF-Sense now for over a month and it works great on my > > WARP. Now I plan to extend my wlan with 2 WARP boxes working as AP's. > > Is this possible with PF-Sense? > > > > The configuration would by like this: > > > > PF-Sense Firewall running on a WARP1 > > | > > ==== AP 1 running PF-Sense on a WARP2 > > | > > ==== AP 2 running PF-Sense on a WARP2 > > > > The AP's would by connected by Cat5e Cable and powered with Power-Over-Ethernet. > > > > Thanks for reply's > > > > kab > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > >
--------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
