Hi,
i have 1,600 local user of wireless using captive portal. In 3 hours, there
are 100 user connected when i checking in captive portal status. Sometimes,
my server get stuck, so i have to reboot my server. Right know i'm using HP
DL140 G2 with 2.8 GHZ xeon processor and 1GB RAM. Installation using
default with snapshot 1.0.1-SNAPSHOT-01-30-2007. Should i up my swap space
during installation (right know use default - just click and click) or
should i use diffrent radius server? Sorry for my bad english. Thank you
----- Original Message -----
From: "Andrew Kemp" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Thursday, March 01, 2007 11:08 AM
Subject: Re: [pfSense Support] DHCP + Cisco sip phones
so im having some problems getting it to work. the dhcp part is working
and the phones had already been configured once so it "remembers" the
previous config, however, the dhcp server is not passing along the tftp
server name value like it should. i added this line to my dhcpd.conf
option tftp-server-name "xxx.xxx.140.88";
i also tried it without the quotes. i have tried it in the pool section
and below it where the routers and name servers go. i also kill -HUP'd the
dhcpd process after changing it but still the phones do not ever recieve
the tftp server ip in the config.
ideas?
andrew
Wade Blackwell wrote:
You would have to manually edit the config file and restartd dhcpd.
Wade B
On 2/11/07, Andrew Kemp <[EMAIL PROTECTED]> wrote:
im looking to do dhcp on a small /29 network for my sip phones. i know
dhcp is capable of passing info such as default tftp server and the
like. i looked in the dhcp page but dont see anything like this
available from the web page. is this a possiblity to add so that cisco
sip phones will get all the info they need through dhcp?
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
