Possible tangent (apologies)- I haven't tried any BSD variants on the current Dell PowerEdge series, but I have tried Fedora, CentOS, and Suse, and had problems with the built-in NIC on all of them. Are you using this built-in NIC in your bridge? Are you able to have it work alright in pfSense or Monowall at all?
Danno Danno.appliedi.net/drupal/ -----Original Message----- From: Christian Krützfeldt [mailto:[EMAIL PROTECTED] Sent: Monday, March 05, 2007 7:32 AM To: [email protected] Subject: [pfSense Support] Recent snapshot on a DELL PowerEdge SC 1425 Yesterday I tried to get pfSense running again on one of our firewalls which currently runs monowall. I used the snapshot from http://snapshots.pfsense.com/FreeBSD6/RELENG_1/iso/ from the 5th of March. Hardware is a DELL PowerEdge SC 1425, with 4 Network interfaces. During installation it displays a couple of errors and warnings but nothing that stops it from starting. Older version won't boot at all. After everything is up and running, I have two problems with it. Roughly every 20 minutes the system freezes, if I use the web interface a lot to make random changes to the configuration I can get it to freeze even faster. When it is frozen, I have to press the reset button on the server to get it working again. Nothing else works. The other problem I have is I have a bridge from the WAN to the OPT1 interface, but the bridge is not working. I can not access the OPT1 interface from anywhere. While the second problem might be a configuration error, the first one isn't. What should I do to debug that problem? Best regards, Christian --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
