What should it read on the fresh install ? It's a productive system... it's hard to reinstall in between...
On the non-working-system it reads: # ipfw show 00030 147403 130387849 skipto 50000 ip from any to any in via fxp0 keep-state 00030 43395 63498221 skipto 50000 ip from any to any in via fxp2 keep-state 00030 0 0 skipto 50000 ip from any to any in via fxp1 keep-state 00030 0 0 skipto 50000 ip from any to any in via fxp3 keep-state 00050 0 0 skipto 29900 ip from any to any MAC 00:0e:35:6c:bf:d8 any keep-state 00050 0 0 skipto 29900 ip from any to any MAC any 00:0e:35:6c:bf:d8 keep-state 00050 0 0 skipto 29900 ip from any to any MAC 00:14:6c:6c:f4:58 any keep-state 00050 0 0 skipto 29900 ip from any to any MAC any 00:14:6c:6c:f4:58 keep-state 00050 0 0 skipto 29900 ip from any to any MAC 00:18:de:a0:f7:2e any keep-state 00050 0 0 skipto 29900 ip from any to any MAC any 00:18:de:a0:f7:2e keep-state 00050 0 0 skipto 29900 ip from any to any MAC 00:80:5a:35:4f:7b any keep-state 00050 0 0 skipto 29900 ip from any to any MAC any 00:80:5a:35:4f:7b keep-state 01000 76193 64802776 skipto 50000 ip from any to any not layer2 not via ath0 01001 32161 1841212 allow ip from any to any layer2 not via ath0 01100 0 0 allow ip from any to any layer2 mac-type 0x0806 01100 4 460 allow ip from any to any layer2 mac-type 0x888e 01100 0 0 allow ip from any to any layer2 mac-type 0x8863 01100 0 0 allow ip from any to any layer2 mac-type 0x8864 01100 0 0 allow ip from any to any layer2 mac-type 0x8863 01100 0 0 allow ip from any to any layer2 mac-type 0x8864 01100 0 0 allow ip from any to any layer2 mac-type 0x888e 01101 0 0 deny ip from any to any layer2 not mac-type 0x0800 01102 103 6114 skipto 20000 ip from any to any layer2 01200 0 0 allow udp from any 68 to 255.255.255.255 dst-port 67 in 01201 0 0 allow udp from any 68 to 10.100.101.1 dst-port 67 in 01202 0 0 allow udp from 10.100.101.1 67 to any dst-port 68 out 01203 0 0 allow icmp from 10.100.101.1 to any out icmptypes 8 01204 0 0 allow icmp from any to 10.100.101.1 in icmptypes 0 01300 0 0 allow udp from any to 10.100.101.1 dst-port 53 in 01301 0 0 allow udp from 10.100.101.1 53 to any out 01302 29 1655 allow tcp from any to 10.100.101.1 dst-port 8000 in 01303 23 976 allow tcp from 10.100.101.1 8000 to any out 19902 0 0 fwd 127.0.0.1,8000 tcp from any to any dst-port 80 in 19903 0 0 allow tcp from any 80 to any out 19904 51 3483 deny ip from any to any 29900 382 54201 allow ip from any to any layer2 65535 267263 258737393 allow ip from any to any -----Ursprüngliche Nachricht----- Von: Scott Ullrich [mailto:[EMAIL PROTECTED] Gesendet: Sonntag, 4. März 2007 19:06 An: [email protected] Betreff: Re: [pfSense Support] Captive Portal Also, please install a working version and from the shell do a: ipfw show Then reinstall the non working version and from a shell do: ipfw show Scott On 3/4/07, Scott Ullrich <[EMAIL PROTECTED]> wrote: > On 3/4/07, Fuchs, Martin <[EMAIL PROTECTED]> wrote: > > Hmmm, tried the latest snapshot... wpa2 does not seem to work with the > > captive portal until now... site cannot be found... :( > > Reinstall? The options are definitely back. > > # pfsense requires for WPA > add 1100 set 1 pass layer2 mac-type 0x888e > > Scott > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
