Also it appears that recent snapshots (6.2) has DMA turned on.
Please turn off DMA and see if the problem goes away. I need to verify this before I make the change to turn it off in our tree. http://wiki.pfsense.com/wikka.php?wakka=BootTroubleShooting On 4/20/07, Ryan Wagoner <[EMAIL PROTECTED]> wrote:
You don't need to resize the flash image to match your cf card. The replace_conf.sh script I wrote and I use it all the time with snapshots. You might try just writing the snapshot image to your cf card and booting it without all the extras to see if it works. Then add back in your config, test, then resize the image if you still want to. -----Original Message----- From: Josep Pujadas i Jubany [mailto:[EMAIL PROTECTED] Sent: Friday, April 20, 2007 9:50 AM To: pfSense Subject: [pfSense Support] Can't boot from last Embedded Snapshot Hello! My steps: 1.- A new CF card (in order to minimize my out-of-service time) 2.- Download http://snapshots.pfsense.com/FreeBSD6/RELENG_1/embedded/pfSense.img.gz 3.- gunzip pfSense.img.gz 4.- Replace config.xml at pfSense.img (with my last config.xml saved) using replace_conf.sh from http://forum.pfsense.org/index.php/topic,1998.0.html 5.- Resize pfSense.img to 1024 MByte (for my new CF) using mkflash_new.sh http://pfsense.org/cgi- bin/cvsweb.cgi/~checkout~/tools/builder_scripts/mkflash_new.sh? rev=1.1;content-type=application%2Fx-sh 6.- Write pfSense-1024MB.img.gz to my new CF. 7.- Shutdown / Turn Off / Extract Old CF / Put New CF / Turn On I can't boot. My box sees the CF card as ad2. Is a FabiaTech FX5620 from http://linitx.com/product_info.php?cPath=4&products_id=909 Is it possible that Embedded image only works for ad0 ? If yes, how to change it before writting my CF ? I need to change to the last Snapshot for VPN stability, please help! Thanks, Josep Pujadas --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
--------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
