Hello! I've been using PPTP VPN for quite a while and have just recently
started using the Captive Portal. However, when I enable captive portal,
all traffic from PPTP clients does not pass. I have a rule to allow ALL
traffic from PPTP clients into the LAN. Also, the LAN is where I have
enabled the captive portal. I have tried assigning the range of
MACs'/IP's that are assigned to PPTP clients in the pass-through section
of the captive portal but still no traffic passes.
When connected remotely via PPTP, I can open up a new shell and start a
continuous ping to an IP on the LAN segment. When I enable the captive
portal, all pings are lost. Stopping the CP and all pings come right
back. The only host I have access to in this situation is the pfSense
box itself. Even when traffic is blocked from the LAN, I can access the
web configurator.
Is this a bug? Do I need to have any special firewall rules? Help!
--Tim Nelson
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
