I'm using PfSense-Full-1.0.1-SNAPSHOT-03-27-2007, package NUT 2.0.5, APC Smart-UPS SUA1500RMI2U using USB cable. Nut is seems to be working ok, but on the syslog there are some error messages:
(...) May 10 09:20:16 upsd[28670]: Data for UPS [apc] is stale - check driver May 10 09:20:14 upsd[28670]: UPS [apc] data is no longer stale May 10 09:20:14 upsd[28670]: UPS [apc] data is no longer stale May 10 09:20:14 upsd[28670]: Data for UPS [apc] is stale - check driver May 10 09:20:14 upsd[28670]: Data for UPS [apc] is stale - check driver May 10 09:20:12 upsd[28670]: UPS [apc] data is no longer stale May 10 09:20:12 upsd[28670]: UPS [apc] data is no longer stale May 10 09:20:12 upsd[28670]: Data for UPS [apc] is stale - check driver May 10 09:20:12 upsd[28670]: Data for UPS [apc] is stale - check driver May 10 09:20:10 upsd[28670]: UPS [apc] data is no longer stale May 10 09:20:10 upsd[28670]: UPS [apc] data is no longer stale May 10 09:20:10 upsd[28670]: Data for UPS [apc] is stale - check driver May 10 09:20:10 upsd[28670]: Data for UPS [apc] is stale - check driver May 10 09:20:08 upsd[28670]: UPS [apc] data is no longer stale May 10 09:20:08 upsd[28670]: UPS [apc] data is no longer stale May 10 09:20:08 upsd[28670]: Data for UPS [apc] is stale - check driver May 10 09:20:08 upsd[28670]: Data for UPS [apc] is stale - check driver May 10 09:20:06 upsd[28670]: UPS [apc] data is no longer stale May 10 09:20:06 upsd[28670]: UPS [apc] data is no longer stale May 10 09:20:06 upsd[28670]: Data for UPS [apc] is stale - check driver May 10 09:20:06 upsd[28670]: Data for UPS [apc] is stale - check driver May 10 09:20:04 upsd[28670]: UPS [apc] data is no longer stale May 10 09:20:04 upsd[28670]: UPS [apc] data is no longer stale May 10 09:20:04 upsd[28670]: Data for UPS [apc] is stale - check driver May 10 09:20:04 upsd[28670]: Data for UPS [apc] is stale - check driver (...) After reading the nut's faq (http://www.networkupstools.org/faq/) I changed the MAXAGE on upsd.conf and things seems to be settled down. For the moment I just want to request the possibility to set MAXAGE on the nut package interface. Thanks! Best regards, -- Aristeu Gil Alves Jr --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
