That is kinda what I suspected .... :-( Thanks for the suggestions & quick response!!
----- Original Message ----- Subject: Re: Re: Re: [pfSense Support] upgrading Soekris 4801 From: [EMAIL PROTECTED] > Not sure why you are not seeing it... It should appear for all platforms. > > At this point I would reflash. > > Scott > > > On 5/15/07, David Strout <[EMAIL PROTECTED]> wrote: > > I don't have that option. Here's what my ssh > > session looks like: > > > > *** Welcome to pfSense 1.2-BETA-1-embedded on > > espfwvpn *** > > > > WAN* -> sis0 -> > > xx.xx.xx.xxx > > LAN* -> sis4 -> > > 192.168.1.1 > > > > pfSense console setup > > *********************** > > 0) Logout (SSH only) > > 1) Assign Interfaces > > 2) Set LAN IP address > > 3) Reset webConfigurator password > > 4) Reset to factory defaults > > 5) Reboot system > > 6) Halt system > > 7) Ping host > > 8) Shell > > 9) PFtop > > 10) Filter Logs > > 11) Restart webConfigurator > > 12) pfSense PHP shell > > > > Is this a "serial console" connection option > > only?? > > > > I am running: > > > > 1.2-BETA-1 > > built on Mon Apr 30 11:14:16 EDT 2007 > > > > Should I try a little older snap to get that > > functionality or id there the possibility of using > > the old fetch command for upgrading? > > > > ----- Original Message ----- > > Subject: Re: Re: [pfSense Support] upgrading > > Soekris 4801 > > From: [EMAIL PROTECTED] > > > > > On 5/15/07, David Strout <[EMAIL PROTECTED]> > > wrote: > > > > I did a reboot and still no go ... is the > > upgrade > > > > from console available through an ssh session? > > I > > > > don't see it in the options from ssh. > > > > > > Yes, option 13. > > > > > > 13) Upgrade from console > > > > > > Scott > > > > > > > > --------------------------------------------------------------------- > > > To unsubscribe, e-mail: > > [EMAIL PROTECTED] > > > For additional commands, e-mail: > > [EMAIL PROTECTED] > > > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
