multicast - I've seen bad drivers out there in the past (usually it's a few lines of code missing somewhere in the driver). Honestly, you'd be more likely to have issues with ALTQ than with CARP, but it's certainly possible. Good luck.
--Bill On 6/29/07, Chris Daniel <[EMAIL PROTECTED]> wrote:
Thanks for the reply, Scott. I'd love to go with Intel, but their prices for dual-port cards (around 150 USD) are a little too high for the moment. I was more wondering if CARP even does anything that a NIC might not support; I doubt it, but I don't know enough about it to say definitively. We'll see how it turns out. Thanks again. Scott Ullrich wrote: > On 6/28/07, Chris Daniel <[EMAIL PROTECTED]> wrote: >> Someone mentioned to me that he vaguely recalled there being an issue >> with CARP and some drivers. Just to be safe, I'd like to clarify whether >> there should be any compatibility problems with NICs using the sf(4) >> driver and CARP -- I've looked on the web, but haven't found anything. >> I'm looking at buying a couple of Adaptec ANA-62022 dual-port NICs, and >> want to make sure they will work in my CARP cluster. Thanks in advance. > > I do not have any experience with these cards but I highly recommend > going with Intel which are known to work OK. > > Scott > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
--------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
