Hi everyone.
I have a cable connection. I can get up to 4 IP addresses via DHCP on this
line. I run pfSense on a WRAP with 3 Interfaces. One LAN, one for DMZ and one
WAN. It works great. Now I have two webservers in the DMZ. I'd like to use port
80 with both of them. All howto's etc descript a similar setup with virtual
ip's but as far as I see this only works with fixed IP addresses. I can only
get them via DHCP. I do not want to select DHCP get an IP, change to fix with
the ip I got and do this several times to get new ip's.
Can I somehow create virtual interfaces which I then set to DHCP? The WRAP box
has only 3 nics and I cannot expand. I don't want to use a big loud (compared
to WRAP) pc with several nics.
In Linux I can use something like eth0:0, eth0:1 etc for virtual interfaces
which I can set independently from the main eth0 interface. I do not need load
balance or similar as its the same cable connection anyways.
Anyone knows a solution for my problem?
Regards,
Marc
