It's IDE. -----Original Message----- From: sai [mailto:[EMAIL PROTECTED] Sent: Saturday, July 14, 2007 7:05 AM To: [email protected] Subject: Re: [pfSense Support] VIA C7 board
Don't use usb cf readers. almost never work with freeBSD; Smaller, older cf cards tend to work very easily, 8GB is overkill. If this is all you got, then I remember seeing a script to resize images - you may have to use that. It might be on the forum. I have installed from an iso image onto a CF installed as hard disk (cf-ide converter). That works fine. Since your board doesn't detect the card then probably a problem with your BIOS settings. sai On 7/14/07, Dave Cabot <[EMAIL PROTECTED]> wrote: > I've tried to install pfsense onto the CF as if it was a hard drive, > but apparently the OS isn't seeing it at all. That may be part of the > original problem. The case is a M200. Is there something I must do > to get the kernel to recognize the CF reader at boot? > > Dave > > -----Original Message----- > From: Dave Cabot [mailto:[EMAIL PROTECTED] > Sent: Thursday, July 12, 2007 6:44 AM > To: [email protected] > Subject: [pfSense Support] VIA C7 board > > I'm attempting to get the embedded release to run on a jetway VIA C7 based > board (7F2WE1G2E specifically). I used physdskwrite.exe to copy the image > to a 8 GB CF card. The BIOS can't find anything to boot. Questions > that come up are: > > 1) Will the provided 1.2 B2 embedded image run on a VIA C7? > 2) Is there a problem loading the image onto a 8GB CF? > 3) Other than trying to do this across Windows, is there something I'm > doing wrong? > 4) Now that PC engines refuses to make any more WRAP boards, what good > alternatives do we have? > > Thanks for the help folks. > > Dave Cabot > ICON Soluciones > +505 419-0750 office | +1 727 490-3579 VoIP USA > +505 841-1013 cell | +1 519 489-0516 VoIP Canada > | +1 727 683-9313 fax > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] For additional > commands, e-mail: [EMAIL PROTECTED] > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] For additional > commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
