Thanks Tim - I was connecting the AP's WAN port to my OPT1 interface. Once I changed that, it worked better. I'm still having a few problems but I think I've narrowed them down to a defective AP.
Paul On 8/31/07, Tim Nelson <[EMAIL PROTECTED]> wrote: > Paul- > > Run an ethernet cable from your OPT1 interface to one of your switch/LAN > ports on your AP. Make sure it is NOT the WAN/Internet port. Disable DHCP on > the AP. You may also want to configure MAC filtering, Encryption, and > authentication on the AP. In pfSense, enable DHCP on your OPT1, and put in > your firewall rules. You may wish to start with an "Allow all FROM anywhere > TO anywhere" rule to get started before locking things down. > > I know this isn't a 'tutorial' as you requested, but it can at least give you > a good start. I run a Linksys WRT54G with DD-WRT on an OPT interface in > several locations. Feel free to ask more questions. > > Tim Nelson > Technical Consultant > Rockbochs Inc. > > ----- Original Message ----- > From: "Paul Brown" <[EMAIL PROTECTED]> > To: [email protected] > Sent: Thursday, August 30, 2007 9:34:16 PM (GMT-0600) America/Mexico_City > Subject: [pfSense Support] Tutorial Request: Setting up OPT1 for WiFi > > Perhaps I'm just a bit slower than most but I'm having some trouble > setting up my Linksys (with dd-wrt installed) to run on my OPT1 > interface. I would like to have the Linksys provide the wireless > service but have the DHCP, firewall, etc services handled by pfSense. > > Would anybody be willing to write a tutorial on this for > http://www.pfsense.com/index.php?id=36 ? It seems like this would be > useful to a number of people. > > Thanks > Paul > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
