Well guys, after reading around some tutorials about Bridge Mode with this modem, pfsense couldn't authenticated with this modem.
I read a lot of info from dslreports.com about this issue, follow some docs, but no success. Right now i just will be part of the DMZPlus, and if i get this to work i let u know guys, thanks all for your help!!! 2007/9/4, Alberto Moreno <[EMAIL PROTECTED]>: > > Hi guys. > > I already try the DMZ-Plus stuff, but look what i need to do, and after > this, if i reboot my pfsense i need to do this again: > > 1; Disable DHCP server in my pfsense. > 2; Put my WAN nic in DHCP mode. > 3; Enable DHCP Server inside 2WIRE > 4; Detect inside 2WIRE my PFsense-WAN > 5; Put my PFsenseWAN in DMZPlus > 6; Disable 2WIRE dhcp server > 7; Enable DHCP server inside PFsenseLAN > 8; After this i can use PFsense. > > But if for some reasons i reboot my pfsense, a lost everything, i need > to do this again, is very exhausted. > > Now, another thing, look this is my small network: > > > DSL <-- > | > | > --------------------- > ---------------------------- > | | <-----PfsenseWAN--- | PFsense Box | <--- > > | 2WIRE | <-----LAN Switch---- --------------------------- > | > --------------------- > | | PfsenseLAN > | > | | > | | > --------------------------- | > | > |--->| | <--| > Internet | LAN Switch | > > --------------------------- <-----> Clients LAN > > > Now why this settings??? > > 1; If i disconnect my 2WIRE from my switch, i lost all communication from > my LAN, i couldn't access 2WIRE settings inside my LAN. > 2; " , none of > my clients could access Internet. > > I was trying to access my ISP from pfsense, i setup my WAN for PPPoE, > all the settings like before, but pfsense cannot negotiated with ISP, i > still don't now why, looks like 2WIRE doesn't want to let other device > handled the connection. > > Now i need to check about the bridge mode see how it works. I will let > u know guys, thanks for your help!!! > > 2007/9/3, Mike <[EMAIL PROTECTED] >: > > > > Alberto Moreno wrote: > > > > > > Hi people. > > > > > > This week my ISP told me that i need to change my old modem: DSL > > modem > > > speedstream 5400, just a modem. My LAN was behind pfsense, DHCP, one > > vpn > > > to my office, it was very beautiful. Some times i just connect my box > > > and i was at work, didn't need to get there. > > > > > > Now, i have this 2wire Modem+Router(Model 2701HG-T), which if came > > > with built-in Firewall, wireless, and other cool stuff for someone > > with > > > no acknowledge of pfsense could say, this is great!!! > > > > > > Now i don't how to hell i will have my old settings, i cannot > > disable > > > the firewall from that device, i cannot access my office from my LAN > > > clients, the only one who could access my office is the pfsense box, > > > because i enable some rule to the 2wire firewall, but any of my > > clients > > > can. > > > > > > I'm lost, i don't know how is the gateway now or which one i chose? > > > What about my WAN interface? I try to connect my wan interface but i > > > don't get any answer from my ISP. > > > > > > I disable the DHCP server from the device, but right now my Gateway > > > is 2wire, what can i do to bring everything to normal? do i need tot > > add > > > each rule to my LAN and NAT or forward to my 2wire gateway? > > > > > > Someone could point me, what i need to do, or help me understand my > > > case and help me find some path to this? > > > > > > Thanks all for your time. > > > > > > P.S. Running pfsense 1.0.1 Release. > > > > > > -- > > > LIving the dream... > > > > I have the same gateway, and I just set the PFsense box in DMZ plus mode > > (in the 2wire gateway) and specified that it gets the external IP from > > my ISP. I am thinking that the 2wire's allow for proprietary firmware/ > > software for each ISP though, so this may not work for you. When you > > attempt to log in, do you use the http://<gateway address>? The address > > you type in here is found in your PFsense WAN gateway. After you have > > made the changes in your 2wire, you will need to reboot the pfsense box. > > > > Mike > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > -- > LIving the dream... -- LIving the dream...
