Can you confirm that the load balancer config sync'd over to the secondary? Also, assuming it did, can you do a 'ps -ax |grep slb' from the shell? I suspect it never started slbd after sync (as an interim workaround, you could try going to the load balancer page on the secondary and editing/saving the config).
--Bill On 10/9/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > > Hi Bill, > > Sorry, inbound... we have 2x Web Servers behind the PFsense boxes so we are > load balancing 443 and 80 TCP > > Lee > > On Tue, 9 Oct 2007 08:47:27 -0500, "Bill Marquette" <[EMAIL PROTECTED]> wrote: > > Inbound or outbound load balancing? > > > > --Bill > > > > On 10/9/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > >> > >> Hi There, > >> > >> Im using 1.2 RC2 on Intel boxes. I have the load balancer setup and > > working, the two machines are syncing settings and the carp is working > > properly. However, if I reboot the primary firewall the secondary takes > > over pings, but the load balancing doesnt work again until the primary is > > back online. > >> > >> Everything seems to be ok, when the primary disappears, the ping drops 1 > > packet, then the secondary carries on and everything runs ok. The servers > > on the lan interface of the firewall can route out to the internet fine > > whilst running with only the secondary firewall. The only thing not to > > work is the load balancer. > >> > >> Anyone have any ideas? > >> > >> I have it wired as: > >> > >> INTERNET --> PIX 515 PAIR --> 2X CISCO 3550-EMI --> PFSENSE PAIR --> 2X > > CISCO 3550-EMI --> LAN > >> > >> Each of the pix/pfsense are connected to seperate switches, which are in > > turn linked together. > >> > >> Thanks in advance, > >> > >> Lee > >> > >> > >> --------------------------------------------------------------------- > >> To unsubscribe, e-mail: [EMAIL PROTECTED] > >> For additional commands, e-mail: [EMAIL PROTECTED] > >> > >> > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > -- > > Message scanned for all known viruses by Mailsauce. Email protection > > solutions from E-Sauce. For more information please visit > > http://www.mailsauce.com > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
