please create a ticket for the original problem (creating more than one bridge on releng_1_2) so it doesn't get lost. thanks.
Holger > -----Original Message----- > From: Tom Müller-Kortkamp [mailto:[EMAIL PROTECTED] > Sent: Friday, October 19, 2007 11:37 AM > To: [email protected] > Subject: Re: [pfSense Support] Problem with indipendent > Bridges in 1.2RC > > I found another bug with this setup: > Disabled DMZ to just have sis0 and ath0 for LAN-Interfaces: > DHCP is not working on ath0 when sis0 is LAN and ath0 is bridged. > > When I enable ath0 as LAN interface dhcp works on WLAN (ath0) > but not on sis0. > > In both cases there is just a rule missing to pass udp.68 to > 255.255.255.255:67. > 161983 rule 56/0(match): block in on ath0: 0.0.0.0.68 > > 255.255.255.255.67: BOOTP/DHCP, Request [|bootp] I think this > rule should be added automatical when bridging those Interfaces ... > > Am 18.10.2007 um 18:05 schrieb Holger Bauer: > > > From a quick discussion here on the hackathon this might be > something > > that we need to prohibit for 1.2. So we most likely will setup some > > sanity check that won't let you setup another bridge. > > This seems to require code that is available in the headbranch and > > 1.2 is too close to release to backport this now. Thanks > for reporting > > this. > > > > Holger > > > >> -----Original Message----- > >> From: Tom Müller-Kortkamp [mailto:[EMAIL PROTECTED] > >> Sent: Thursday, October 18, 2007 5:49 PM > >> To: [email protected] > >> Subject: [pfSense Support] Problem with indipendent > Bridges in 1.2RC > >> > >> hi, > >> > >> I have 4 Networkinterfaces 3xLan (sis0=LAN, sis1=WAN, > >> sis2=DMZ) 1xWLAN (=ath0). > >> I want to bridge LAN + WLAN as one > >> and WAN and DMZ as another bridge. > >> > >> When i do this i get one bridge-interface with all other > interfaces > >> as Members: > >> > >> bridge0: > flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > >> ether ee:71:ea:c4:8e:e8 > >> priority 32768 hellotime 2 fwddelay 15 maxage 20 > >> member: sis1 flags=7<LEARNING,DISCOVER,STP> > >> port 3 priority 128 path cost 55 forwarding > >> member: sis2 flags=7<LEARNING,DISCOVER,STP> > >> port 4 priority 128 path cost 55 disabled > >> member: sis0 flags=3<LEARNING,DISCOVER> > >> member: ath0 flags=3<LEARNING,DISCOVER> > >> > >> Fill bugreport or is this a known one? > >> > >> > >> Tom Müller-Kortkamp > >> -- > >> kommunity GmbH & Co.KG > >> Goseriede 4, D-30159 Hannover > >> ------------ > >> Phone +49 (0)5 11 - 80 72 58 - 0 > >> Fax +49 (0)5 11 - 80 72 58 - 10 > >> ------------ > >> Sitz der Gesellschaft: Hannover, > >> Registergericht: Amtsgericht Hannover, Handelsregisternummer HRA > >> 26721 > >> > >> > >> Persönlich haftende Gesellschafterin: > >> kommunity Verwaltungsgesellschaft mbH vertreten durch den > >> Geschäftsführer Tom Müller-Kortkamp Sitz der Gesellschaft: > Hannover, > >> Registergericht: Amtsgericht Hannover, Registernummer HRB 60200 > >> > >> > >> > >> > >> > --------------------------------------------------------------------- > >> To unsubscribe, e-mail: [EMAIL PROTECTED] For > >> additional commands, e-mail: [EMAIL PROTECTED] > >> > >> > >> > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] For > additional > > commands, e-mail: [EMAIL PROTECTED] > > > > -- > kommunity GmbH & Co.KG > Goseriede 4, D-30159 Hannover > ------------ > Phone +49 (0)5 11 - 80 72 58 - 0 > Fax +49 (0)5 11 - 80 72 58 - 10 > ------------ > Sitz der Gesellschaft: Hannover, > Registergericht: Amtsgericht Hannover, > Handelsregisternummer HRA 26721 > > > Persönlich haftende Gesellschafterin: > kommunity Verwaltungsgesellschaft mbH > vertreten durch den Geschäftsführer > Tom Müller-Kortkamp > Sitz der Gesellschaft: Hannover, > Registergericht: Amtsgericht Hannover, > Registernummer HRB 60200 > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] For > additional commands, e-mail: [EMAIL PROTECTED] > > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
