Just looking for confirmation / ideas on how to proced - I have a spare
wrap 1-2 with three nics and a cm9 wireless card. This is actually a
testing/hardware spare for our main firewall router and I have a spare
flash card with that config available, but in the meantime I want to use
this hardware as a wireless access point with authentication to a radius
server.
At the moment my plan is to bridge to the lan interface and not
configure the wan interface with an ip - enable bridge packet filtering
in advance and just do static routing - setting up wireless
authentication through radius. I'm assuming that by bridging I can
utilise the dhcp server that is accessible on the lan.
That's the initial plan anyway
I'ld appreciate any thoughts
Craig
--
--------------------------------------------------------------
Craig Silva, IT Manager, ABX Logistics (Aust.) P/L
9 Trade Park Dve. Tullamarine. Melbourne. vic. 3043 Australia
Tel: + 61 3 9 335 8250, Fax: +61 3 9 335 2714, Mob: 0408408748
Email: [EMAIL PROTECTED]
Web: http://www.abxlogistics.com.au
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
