On 11/6/07, Jarkka Kivikanta <[EMAIL PROTECTED]> wrote: > Hi! > > I'm having problems with syncing of the configuration. > I have 2 nodes with 3 nic's each. > > The IP's are the following: > Node1 > WAN 192.168.1.95 > LAN 192.168.2.4 > SYNC 192.168.200.2 > > Node2 > WAN 192.168.1.90 > LAN 192.168.2.3 > SYNC 192.168.200.1 > > Fail-over of the virtual ip's work correctly if I create the rules manually. > > The following error can be found in the MASTER's system log: > Nov 6 11:20:32 php: : New alert found: An error code was received > while attempting XMLRPC sync with username admin > http://192.168.200.1:9090 - Code 2: Invalid return payload: enable > debugging to examine incoming payload > Nov 6 11:20:32 php: : An error code was received while attempting > XMLRPC sync with username admin http://192.168.200.1:9090 - Code 2: > Invalid return payload: enable debugging to examine incoming payload > > Also in the BACKUP's log the following: > php: /xmlrpc.php: Disallowing CARP sync loop. > > The usernames and passwords are ok. > > Problem might be in the response from xmlrpc.php. > The response has Content-Length: 0 and no body. > > The request is valid xml. > > I have the tcpdump if needed.
Please step through this document http://devwiki.pfsense.org/CARPConfigurationSyncTroubleShooting Scott --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
