Try something like this... "Add a portforward at interface OPT2, external adress any (not interface adress), protocol TCP, external port range 80, NAT IP proxy at OPT6, local port 80. Save, apply.
Oh, btw, if your proxy is not at port 80 you can use it like this: Add a portforward at interface OPT2, external adress any (not interface adress), protocol TCP, external port range 80, NAT IP proxy at OPT6, local port proxyport. Save, apply." -----Ursprüngliche Nachricht----- Von: Alparslan Ozturk [mailto:[EMAIL PROTECTED] Gesendet: Dienstag, 13. November 2007 16:18 An: [email protected] Betreff: [pfSense Support] Squid Transparent Proxy port forwarding Hi, I was trying to configure port forwarding rules like this: rdr on em2 inet proto tcp from any to ! 193.34.133.0/24 port = http -> 193.34.133.75 port 8080 because em2 my lan interface an I want to forward all 80 port to proxy server(75) but expect 193.34.133.0/24 because this network is my dmz network is this posible do this with gui or must I confiugre the /etc/inc/fileter.inc file for above rule. thanks, Alparslan Ozturk [EMAIL PROTECTED] ___________________________________________________________________ Yahoo! kullaniyor musunuz? http://tr.mail.yahoo.com Istenmeyen postadan biktiniz mi? Istenmeyen postadan en iyi korunma Yahoo! Posta'da --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
