Hello,
One of my pfSense boxes with 1.2RC2 on soekris net4801 went belly up.
Below a dump from console. Any ideas?
Regards,
Ole Kaas
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE-p7 #0: Fri Aug 17 18:16:30 EDT 2007
[EMAIL PROTECTED]:/usr/obj.pfSense/usr/src/sys/pfSense_wrap.6
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Geode(TM) Integrated Processor by National Semi (266.66-MHz
586-class CPU)
Origin = "Geode by NSC" Id = 0x540 Stepping = 0
Features=0x808131<FPU,TSC,MSR,CX8,CMOV,MMX>
real memory = 134217728 (128 MB)
avail memory = 121872384 (116 MB)
wlan: mac acl policy registered
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413,
RF5413)
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0xe100-0xe1ff mem 0xa0
0fff irq 10 at device 6.0 on pci0
sis0: Silicon Revision: DP83816A
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: Ethernet address: 00:00:24:c6:64:a4
sis1: <NatSemi DP8381[56] 10/100BaseTX> port 0xe200-0xe2ff mem
0xa0001000-0xa000
1fff irq 10 at device 7.0 on pci0
sis1: Silicon Revision: DP83816A
miibus1: <MII bus> on sis1
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis1: Ethernet address: 00:00:24:c6:64:a5
sis2: <NatSemi DP8381[56] 10/100BaseTX> port 0xe300-0xe3ff mem
0xa0002000-0xa000
2fff irq 10 at device 8.0 on pci0
sis2: Silicon Revision: DP83816A
miibus2: <MII bus> on sis2
ukphy2: <Generic IEEE 802.3u media interface> on miibus2
ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis2: Ethernet address: 00:00:24:c6:64:a6
Geode GPIO@ = 6100
Geode Soekris net4801 comBIOS ver. 1.28 20050529 Copyright
isab0: <PCI-ISA bridge> port 0x6100-0x613f,0x6200-0x623f at device 18.0
on pci0
isa0: <ISA bus> on isab0
pci0: <bridge> at device 18.1 (no driver attached)
atapci0: <National Geode SC1100 ATA33 controller> port
0x1f0-0x1f7,0x3f6,0x170-0
x177,0x376,0xe000-0xe00f at device 18.2 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
Geode CBA@ 0x6000
Geode rev: 06 03
Timecounter "Geode" frequency 27000000 Hz quality 1000
pci0: <bridge> at device 18.5 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xa0003000-0xa0003fff irq 11
at devic
e 19.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x0e11) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
orm0: <ISA Option ROM> at iomem 0xc8000-0xd0fff on isa0
ppc0: parallel port not found.
sio0 at port 0x3f8-0x3ff irq 4 flags 0x30 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
Timecounters tick every 10.000 msec
Fast IPsec: Initialized Security Association Processing.
ad0: 245MB <SanDisk SDCFB-256 HDX 2.15> at ata0-master PIO4
GEOM_LABEL: Label for provider ad0a is ufs/pfSense.
GEOM_LABEL: Label for provider ad0d is ufs/pfSenseCfg.
Trying to mount root from ufs:/dev/ufs/pfSense
___
___/ f \
/ p \___/ Sense
\___/ \
\___/
Welcome to pfSense 1.2-RC2 on the 'embedded' platform...
Setting up embedded specific environment..
Mounting filesystems... done.
Creating symlinks......done.
Launching PHP init system... done.
Initializing.................. done.
Starting device manager (devd)...done.
Loading configuration......done.
Updating configuration...done.
Cleaning backup cache...done.
Setting up extended sysctls...done.
Syncing user passwords...pw: no such user `root'
pw: no such user `admin'
done.
Starting Secure Shell Services...done.
Setting timezone...done.
Starting syslog...done.
Configuring LAN interface...done.
Configuring WAN in
Configuring OPT interfaces...done.
Configuring CARP interfaces...done.
route: writing to routing socket: No such process
route: writing to routing socket: No such process
route: writing to routing socket: No such process
route: writing to routing socket: No such process
route: writing to routing socket: No such process
route: writing to routing socket: No such process
route: writing to routing socket: No such process
route: writing to routing socket: No such process
route: writing to routing socket: No such proc
route: writing to routing socket: No such process
Syncing system time before startup...done.
Warning: chown(): Unable to find uid for nobody in /etc/inc/openvpn.inc
on line
235
Warning: chown(): Unable to find uid for nobody in /etc/inc/openvpn.inc
on line
235
Warning: chown(): Unable to find uid for nobody in /etc/inc/openvpn.inc
on line
235
Warning: chown(): Unable to find uid for nobody in /etc/inc/openvpn.inc
on line
467
Configuring firewall......done.
Starting webConfigurator...pw: no such user `root'
pw: no such user `admin'
done.
pw: no such user `root'
pw: no such user `admin'
Starting DHCP service...done.
Starting DNS forwarder...done.
Setting up microcode and tx/rx offloading...done.
Starting FTP helpers...done.
Generating RRD graphs...route: writing to routing socket: No such process
done.
Starting DHCP service...done.
Starting OpenNTP time client...ntpd: unknown user _ntp
done.
Starting CRON... done.
Executing rc.d items...
Starting /usr/local/etc/rc.d/*.sh...done.
Bootup complete
appending output to nohup.out
FreeBSD/i386 (pfsense.local) (console)
Password:
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
