Still no go... now I get no snort errors and it still doesn't start. However, I do see an XML error now for packages. Wonder where that crept in? I run DHCP, UPnP, and Snort.
Dec 3 15:00:17 syslogd: kernel boot file is /boot/kernel/kernel Dec 3 15:00:17 kernel: pflog0: promiscuous mode disabled Dec 3 15:00:17 kernel: Waiting (max 60 seconds) for system process `vnlru' to stop...done Dec 3 15:00:17 kernel: Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Dec 3 15:00:17 kernel: Waiting (max 60 seconds) for system process `syncer' to stop... Dec 3 15:00:17 kernel: Syncing disks, vnodes remaining...0 done Dec 3 15:00:17 kernel: All buffers synced. Dec 3 15:00:17 kernel: Uptime: 4h42m37s Dec 3 15:00:17 kernel: ukphy1: detached Dec 3 15:00:17 kernel: miibus2: detached Dec 3 15:00:17 kernel: Rebooting... Dec 3 15:00:17 kernel: Copyright (c) 1992-2007 The FreeBSD Project. Dec 3 15:00:17 kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Dec 3 15:00:17 kernel: The Regents of the University of California. All rights reserved. Dec 3 15:00:17 kernel: FreeBSD is a registered trademark of The FreeBSD Foundation. Dec 3 15:00:17 kernel: FreeBSD 6.2-RELEASE-p8 #0: Wed Nov 7 18:38:17 EST 2007 Dec 3 15:00:17 kernel: [EMAIL PROTECTED]:/usr/obj.pfSense/usr/src/sys/pfSense.6 Dec 3 15:00:17 kernel: Timecounter "i8254" frequency 1193182 Hz quality 0 Dec 3 15:00:17 kernel: CPU: AMD Athlon(tm) XP 2000+ (1666.74-MHz 686-class CPU) Dec 3 15:00:17 kernel: Origin = "AuthenticAMD" Id = 0x680 Stepping = 0 Dec 3 15:00:17 kernel: Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,C MOV,PAT,PSE36,MMX,FXSR,SSE> Dec 3 15:00:17 kernel: AMD Features=0xc0400800<SYSCALL,MMX+,3DNow+,3DNow> Dec 3 15:00:17 kernel: real memory = 528416768 (503 MB) Dec 3 15:00:17 kernel: avail memory = 507666432 (484 MB) Dec 3 15:00:17 kernel: wlan: mac acl policy registered Dec 3 15:00:17 kernel: kbd1 at kbdmux0 Dec 3 15:00:17 kernel: ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) Dec 3 15:00:17 kernel: acpi0: <AMIINT VIA_K7> on motherboard Dec 3 15:00:17 kernel: acpi0: Power Button (fixed) Dec 3 15:00:17 kernel: Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 Dec 3 15:00:17 kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 Dec 3 15:00:17 kernel: cpu0: <ACPI CPU> on acpi0 Dec 3 15:00:17 kernel: acpi_throttle0: <ACPI CPU Throttling> on cpu0 Dec 3 15:00:17 kernel: acpi_button0: <Power Button> on acpi0 Dec 3 15:00:17 kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 Dec 3 15:00:17 kernel: pci0: <ACPI PCI bus> on pcib0 Dec 3 15:00:17 kernel: agp0: <VIA XM266 (PM266/KM266) host to PCI bridge> mem 0xe0000000-0xe07fffff at device 0.0 on pci0 Dec 3 15:00:17 kernel: pcib1: <PCI-PCI bridge> at device 1.0 on pci0 Dec 3 15:00:17 kernel: pci1: <PCI bus> on pcib1 Dec 3 15:00:17 kernel: pci1: <display, VGA> at device 0.0 (no driver attached) Dec 3 15:00:17 kernel: fxp0: <Intel 82557 Pro/100 Ethernet> port 0xec00-0xec1f mem 0xdf8ff000-0xdf8fffff,0xdff00000-0xdfffffff irq 10 at device 8.0 on pci0 Dec 3 15:00:17 kernel: miibus0: <MII bus> on fxp0 Dec 3 15:00:17 kernel: nsphy0: <DP83840 10/100 media interface> on miibus0 Dec 3 15:00:17 kernel: nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Dec 3 15:00:17 kernel: fxp0: Ethernet address: 00:a0:c9:1f:3c:4f Dec 3 15:00:17 kernel: sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0xe800-0xe8ff mem 0xdfdff000-0xdfdfffff irq 11 at device 9.0 on pci0 Dec 3 15:00:17 kernel: sis0: Silicon Revision: DP83816A Dec 3 15:00:17 kernel: miibus1: <MII bus> on sis0 Dec 3 15:00:17 kernel: ukphy0: <Generic IEEE 802.3u media interface> on miibus1 Dec 3 15:00:17 kernel: ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Dec 3 15:00:17 kernel: sis0: Ethernet address: 00:09:5b:bd:fc:e3 Dec 3 15:00:17 kernel: isab0: <PCI-ISA bridge> at device 17.0 on pci0 Dec 3 15:00:17 kernel: isa0: <ISA bus> on isab0 Dec 3 15:00:17 kernel: atapci0: <VIA 8235 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 17.1 on pci0 Dec 3 15:00:17 kernel: ata0: <ATA channel 0> on atapci0 Dec 3 15:00:17 kernel: ata1: <ATA channel 1> on atapci0 Dec 3 15:00:17 kernel: vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe400-0xe4ff mem 0xdfdfef00-0xdfdfefff irq 10 at device 18.0 on pci0 Dec 3 15:00:17 kernel: miibus2: <MII bus> on vr0 Dec 3 15:00:17 kernel: ukphy1: <Generic IEEE 802.3u media interface> on miibus2 Dec 3 15:00:17 kernel: ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Dec 3 15:00:17 kernel: vr0: Ethernet address: 00:0d:87:d0:bd:97 Dec 3 15:00:17 kernel: acpi_button1: <Sleep Button> on acpi0 Dec 3 15:00:17 kernel: speaker0: <PC speaker> port 0x61 on acpi0 Dec 3 15:00:17 kernel: fdc0: <floppy drive controller> port 0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0 Dec 3 15:00:17 kernel: fdc0: does not respond Dec 3 15:00:17 kernel: device_attach: fdc0 attach returned 6 Dec 3 15:00:17 kernel: fdc0: <floppy drive controller> port 0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0 Dec 3 15:00:17 kernel: fdc0: does not respond Dec 3 15:00:17 kernel: device_attach: fdc0 attach returned 6 Dec 3 15:00:17 kernel: pmtimer0 on isa0 Dec 3 15:00:17 kernel: orm0: <ISA Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xdbfff on isa0 Dec 3 15:00:17 kernel: atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 Dec 3 15:00:17 kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0 Dec 3 15:00:17 kernel: kbd0 at atkbd0 Dec 3 15:00:17 kernel: atkbd0: [GIANT-LOCKED] Dec 3 15:00:17 kernel: ppc0: parallel port not found. Dec 3 15:00:17 kernel: sc0: <System console> at flags 0x100 on isa0 Dec 3 15:00:17 kernel: sc0: VGA <16 virtual consoles, flags=0x300> Dec 3 15:00:17 kernel: sio0: configured irq 4 not in bitmap of probed irqs 0 Dec 3 15:00:17 kernel: sio0: port may not be enabled Dec 3 15:00:17 kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 Dec 3 15:00:17 kernel: sio0: type 8250 or not responding Dec 3 15:00:17 kernel: sio1: configured irq 3 not in bitmap of probed irqs 0 Dec 3 15:00:17 kernel: sio1: port may not be enabled Dec 3 15:00:17 kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Dec 3 15:00:17 kernel: Timecounter "TSC" frequency 1666738912 Hz quality 800 Dec 3 15:00:17 kernel: Timecounters tick every 1.000 msec Dec 3 15:00:17 kernel: Fast IPsec: Initialized Security Association Processing. Dec 3 15:00:17 kernel: ad0: 3079MB <WDC AC23200L 09.09M08> at ata0-master UDMA33 Dec 3 15:00:17 kernel: acd0: DMA limited to UDMA33, device found non-ATA66 cable Dec 3 15:00:17 kernel: acd0: DVDR <DVD-RW IDE1008/VER 0057> at ata1-master UDMA33 Dec 3 15:00:17 kernel: Trying to mount root from ufs:/dev/ad0s1a Dec 3 15:00:17 kernel: fxp0: link state changed to UP Dec 3 15:00:17 kernel: sis0: link state changed to UP Dec 3 15:00:17 kernel: vr0: link state changed to UP Dec 3 15:00:17 kernel: fxp0: link state changed to DOWN Dec 3 15:00:19 kernel: fxp0: link state changed to UP Dec 3 15:00:59 kernel: pflog0: promiscuous mode enabled Dec 3 15:01:09 pftpx[420]: listening on 127.0.0.1 port 8021 Dec 3 15:01:09 pftpx[420]: listening on 127.0.0.1 port 8021 Dec 3 15:01:09 pftpx[444]: listening on 127.0.0.1 port 8022 Dec 3 15:01:09 pftpx[444]: listening on 127.0.0.1 port 8022 Dec 3 15:01:13 dhcpd: Internet Systems Consortium DHCP Server V3.0.5 Dec 3 15:01:13 dhcpd: Copyright 2004-2006 Internet Systems Consortium. Dec 3 15:01:13 dhcpd: All rights reserved. Dec 3 15:01:13 dhcpd: For info, please visit http://www.isc.org/sw/dhcp/ Dec 3 15:02:10 php: : Creating rrd update script Dec 3 15:02:10 dhcpd: Internet Systems Consortium DHCP Server V3.0.5 Dec 3 15:02:10 dhcpd: Copyright 2004-2006 Internet Systems Consortium. Dec 3 15:02:10 dhcpd: All rights reserved. Dec 3 15:02:10 dhcpd: For info, please visit http://www.isc.org/sw/dhcp/ Dec 3 15:02:12 php: miniupnpd: Starting service on interface: lan, opt1 Dec 3 15:02:12 miniupnpd[841]: HTTP listening on port 2189 Dec 3 15:02:13 php: : Resyncing configuration for all packages. Dec 3 15:02:13 php: : XML error: not well-formed (invalid token) at line 1 Dec 3 15:02:33 SnortStartup[927]: Ram free BEFORE starting Snort: 12M -- Ram free AFTER starting Snort: 12M -- Mode ac-sparsebands -- Snort memory usage: Dec 3 15:02:33 miniupnpd[841]: received signal 15, good-bye Dec 3 15:02:34 check_reload_status: check_reload_status is starting Dec 3 15:02:34 miniupnpd[969]: HTTP listening on port 2189 Dec 3 15:02:35 login: login on ttyv0 as root Dec 3 15:02:35 sshlockout[973]: sshlockout starting up Dec 3 15:02:35 sshlockout[973]: sshlockout starting up Dec 3 15:02:50 SnortStartup[998]: Ram free BEFORE starting Snort: 12M -- Ram free AFTER starting Snort: 13M -- Mode ac-sparsebands -- Snort memory usage: -----Original Message----- From: Scott Ullrich [mailto:[EMAIL PROTECTED] Sent: Monday, December 03, 2007 1:59 PM To: [email protected] Subject: Re: RE: [pfSense Support] Snort On 12/3/07, Jason J. Ellingson <[EMAIL PROTECTED]> wrote: > Most excellent. > > However (the ungrateful scum I am), now snort will not start at all... > the error is: > > php: : Snort will not start. You must select an interface for it to > listen on. > > I have double checked and the WAN is selected. Perhaps I need to > completely scratch the config for snort and start over? Reinstall the package about 10+ minutes from now. I just fixed a bug. Scott --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
