Is there a driver in 1.2-RC3-embedded for USB-Serial converters? or a way to add it in? -- this is on an ALIX.2C3 board built with pfSense-1.2-RC3-Embedded.img -- so far everything else is working great!
The converter does show up in the system.log as a generic device, but I can't seem to talk to it: Dec 12 23:33:23 hostname kernel: ugen0: FIDI USBSERIALCONVERTER, rev 1.10/4.00, addr 2 I believe this is working in FreeBSD. (and likely in a full install of pfSense?) Is this something that was left out of the embedded version? Will I need to build a new image? I do know this very converter works well under both linux and OS X. - in fact I used it under OS X to bring up the ALIX board serial console in terminal.app - using screen - it worked very well. I'm a newbie to BSD - just setup this pfSense FW as well as a 'normal' FreeBSD box as well to do some poking around and learning. from OS X, the details of the converter are: Version: 4.00 Bus Power (mA): 500 Speed: Up to 12 Mb/sec Manufacturer: FIDI Product ID: 0x6001 Serial Number: FTCDLDDH Vendor ID: 0x0403 Thanks for any and all help, pointers, or even RTFM pointers if I missed it ;-) -CK --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
