Thank you. I had to enable SSH to do it (the direct connect terminal kept doing funky things in VI), but I got it done. Thank you everyone for your help.
Chris -----Original Message----- From: Jaye Mathisen [mailto:[EMAIL PROTECTED] Sent: Thursday, December 20, 2007 5:48 PM To: [email protected] Subject: Re: [pfSense Support] Setting up on Soekris NET5501-70 with all features Edit /etc/fstab from a shell, and change the entry for / to the right device. On Thu, Dec 20, 2007 at 04:37:44PM -0500, Christopher Iarocci wrote: > Chris, > > So I got the firewall installed on the hard drive, inserted into the Soekris > board and I'm able to see the boot up from the serial console. I thought > everything was good but then it got to the mount part and was not able to > mount root (Trying to mount root from ufs:/dev/ad4s1a). I had to manually > enter in ufs:ad1s1a (Note, it's ad1, not ad4) to get it to boot. It seems > it's trying to mount root from the wrong place and I must manually enter in > the mount command to get it to go. Once I do that it boots up fine and the > firewall works. How do I get the firewall to automatically mount the > correct drive? --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.503 / Virus Database: 269.17.5/1190 - Release Date: 12/19/2007 7:37 PM --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
