I am having the same problem. I have an external IP from Qwest which is part of an 8-IP address block. That IP is the "gateway" and the others are for my use. SO I am trying to assign them to devices on my local net.
I set up mine in virtual IP, and created a NAT rule with the option selected to also create an associated firewall rule. I can surf out to the internet just fine but I can not access the device through the IP I designated, from the outside going in. I don't know about you, but I am using pfSense 1.01 and no extra services like Squid. One person suggested that Squid was installed and was block the entrance from the outside. But that was not the case because it is not installed. So I am in the same boat you are. James Kusler, Information Technology Manager PHONE| 509.624.1613 or 800.822.4456 FAX| 509.624.1604 [EMAIL PROTECTED] | www.sound-tele.com | www.solaxis.com -----Original Message----- From: Ryan Rodrigue [mailto:[EMAIL PROTECTED] Sent: Wednesday, December 26, 2007 9:19 AM To: [email protected] Subject: [pfSense Support] Virtual Ips I have a stupid question.. I am trying to set up 2 servers with a seperate external IP adresses. My wan IP is x.x.x.74 I want to use x.x.x.73 for server 1 and x.x.x.72 for server 2. Server 1 is 192.168.1.10 and server 2 is 192.168.1.11. I think i have to set this up in 1:1 nat, Firewall rules, and also in Virtual IPs. Is there anywhere else i need to set this up, It doesn't seem to be working. Maybe I have this way off or something else. Thanks for your help. --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
