On Jan 24, 2008, at 1:44 PM, Scott Ullrich wrote:
On 1/24/08, [EMAIL PROTECTED] <[EMAIL PROTECTED]>
wrote:
Hello,
I am attempting to install pfSense on a 2 GB CF card for use on a PC
Engines motherboard without video (alix2c3.)
I have used the live disc under VMWare and connected the card via USB
reader. Everything works great and the install begins, but then hangs
forever (overnight at least) at 35%, which is:
/usr/local/bin/cpdup -vvv -I -o /usr /mnt/usr
I have tested the card and reader extensively; everything works. I
have re-attempted the above process several times.
How do I work around this?
Also, how do I put reasonable settings onto here, so that I can avoid
setting up a console with my alix board? I'd prefer to have simple
DHCP auto-configuration on at least one NIC and SSH/HTTP admin access
working immediately after booting.
That portion of the installer takes quite a while depending on speed
of the CF card, etc. Give it a bit longer.
Scott
How long should I give it? I already gave it roughly 4-6 hours...
I can write the whole card full of data in about 15 minutes using the
same reader.
What in the world is it doing??
-Galen
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
