curtis, what was the previous setting? sai
On 4/8/08, Curtis Maurand <[EMAIL PROTECTED]> wrote: > > The problem turned out to be packet state maintenance. I set it to "Keep > State" for all of my rules having to do with NAT and tunnels and it solved > all of the problems. It was one of those "duh." moments. :-) > > Its kind of interesting that Windows 2000, 2000 Server, XP and 2003 Server > didn't seem to care about the setting. > > Thank you to all who had suggestions on these two problems. > > Sincerely, > Curtis Maurand > > > ----- Original Message ----- > From: "RB" <[EMAIL PROTECTED]> > To: [email protected] > Sent: Tuesday, March 18, 2008 2:15:34 PM (GMT-0500) America/New_York > Subject: Re: [pfSense Support] Strange problem > > On 3/18/08, Curtis Maurand <[EMAIL PROTECTED]> wrote: > > Like I said, it works fine on the same hardware if I run Windows, but > not if > > I run Linux. I've used IE and firefox on Windows, IE, firefox, epiphany > and > > konqueror on Linux. I wish I had a MAC to test with. :-( > > I have one, and it works fine on my various networks. > > OS and hardware likely aren't the issue here. Have you done something > like 'export http_proxy="http://foobar:8080";' in your profile on the > Linux box, or set up a port redirect with iptables, or any one of the > other thousands of ways to muck with your http traffic on a Linux > client? Have you tried using wget, curl, or lynx? > > Try the tcpdump from your pfSense system; it'll be the most immediate > and apparent. If you see appropriate traffic (which at the moment I > honestly doubt you will), then there's something really strange with > your pfSense setup. Otherwise, you know it's something on the client. > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > >
