Richard Davis wrote:
Over the weekend I tried to load 1.2(general release) on an ALIX2C3 Board (3
LAN/ 1 MINI-PCI/ LX800) board. Once the Ethernet ports were assigned via
the serial port it would hang on reboot after the DHCP line.
My bios is .98. I tried to upgrade the bios using the freedos3.zip file
from PCengines website as well as using physdiskwrite. After trying 4
different size CF's and the system giving a CF read error, I tried
monowall(to prove that I didn't mess up my new board). It loaded and came
up on the first try. 15 mins later my home DSL was back online and working.
I would like to run PFSense instead of monowall but I need help. Any
suggestions?
Upgrade to the 0.99 BIOS, what you're seeing is a BIOS bug on the ALIX.
I recommend following the "LBA image" instructions here:
http://pcengines.ch/freedos.htm
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
