As RB would say... I'm not contributing to the answer, but helping to give understanding to the problem...
Untangle, while in bridged mode still really needs its own IP since one of its primary features is to send daily reports as well as to provide access to quarantined emails. This makes it difficult to put a bridged Untangle outside of pfSense in a normal home environment as most ISPs will only provide one IP (which pfSense would use). Also, another reason to keep Untangle on the inside is to allow per-IP (or per-user if the Active Directory module is installed) rules and reporting features. If ram wants to keep these features (and he likely does) he may need to look into switching Untangle into standard router mode (instead of bridged) and then choose to either double-NAT'ing (easy but I shudder at double NAT'ing) or setting up routes in both boxes allowing only pfSense to do the NAT (a bit more work, and ram may not know how to set it up). - Jason -----Original Message----- From: sai [mailto:[EMAIL PROTECTED] Sent: Monday, July 28, 2008 12:12 AM To: [email protected] Subject: Re: [pfSense Support] PF and UT not working how is your network setup? <1> PC ---switch ---- UT ---pfsense or <2> PC ---switch ---pfsense ---- UT I would suggest trying <2> since you just want the CP on pfsense sai --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
