weird problem i'm trying to figure out. i have pfsense 1.2 running and configured with 3 interfaces and a vpn tunnel. i'm trying to allow a public ip address access into my dmz.
i have a rule setup to allow the public ip(static) using udp to the dmz subnet which is 10.0.0.0/24. the rule is configured to allow all UDP traffic sourced from any port access to my 10.0.0.0/24 destined for any port, from the defined static ip. the rule is configured on the WAN interface and is placed above the default drop all traffic rule. my problem is that sometimes the traffic passes as expected and other times it's blocked (as verified by my firewall logs) by the default drop all rule. i'm trying to allow access from one static ip address (my voip provider) into my dmz where my phone box sits. when it works my phone rings when the traffic is blocked obviously it doesn't ring. also, i have several other rules configured accross the multiple interfaces and they are all working as expected. furthermore, i would say that this current voice over ip rule that i'm having problems with works 85% of the time. ps; it would be nice if my voip provider (lingo) wouldn't span thousands of ports, which is why i'm allowing SRC port any --> DST port any from this static ip. calling their tech support doesn't help either they don't even know what ports i'm suppose to let through. any ideas? thanks, -phil --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
