Hello List. Here is my situation. I have been using pfSense for the last year and didn't have any problems till about 2 months ago. I change a job and decided that I needed to renew my IP to make sure that my co-worker does not get in to my computer.
After the renew (and several re-installs) I'm not able to connect to my computer using VNC or in fact not even connect to my Web Server that i setup. In the NAT settings I have Port Forward Tab: If | Proto | Ext. port range | NAT IP | Int. port range | Description ----+-------+-----------------+--------------------------+-----------------+------------ WAN | TCP | 80 (HTTP) | 192.168.1.3(ext.: any) | 80 (HTTP) | My Rules WAS tab: Proto | Source | Port | Destination | Port | Gateway | Schedule | Description ------+------------+-----------+-------------+-----------+---------+----------+------------ TCP |WAN address | 80 (HTTP) | 192.168.1.3 | 80 (HTTP) | * | | NAT This is all i have setup. I do have logging enable on on the rule above. And this is what i get in System logs => Firewall The rule that triggered this action is: @47 block drop in log quick all label "Default block all just to be sure." I'm doing something wrong? Thanks in advance. --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
