Hello fellow pfSense'ers! I've been using NAT to redirect TCP/80 traffic on a subnet to a squid proxy server for quite some time. However, I've found that if I use this functionality on any additional interfaces, connectivity to the squid box gets extremely flaky. Running a constant ping shows that traffic to the squid box is randomly getting dropped. Keep in mind that the squid box is on a different interface/subnet that does NOT have web traffic redirected so I know that squid is not being redirected to itself... I found that one out the "long" way...
Before run a tcpdump or throw a hub between the squid box and the pfsense box, I'd like to know if this is a known problem or if anyone has heard of it? My NAT rule is as follows: Int Proto Ext Port NAT IP Int Port Range Description LAN TCP 80 (HTTP) 10.0.0.10 8080 send http traffic through squid box Hopefully everyone is using a monospaced font in their email so my NAT rule above doesn't get all hosed. All comments and ideas are welcome and appreciated. Thank you! Tim Nelson Systems/Network Engineer Rockbochs Inc. (218)727-4332 x105 --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
